WITH its striking two-tone paint scheme, slick panelwork, slammed stance and monstrous wheels, Ben Judd’s PRO EH was always going to be a fullblooded people magnet. But it’s only after being drawn in by those bigticket items that you get blown away by the clever marriage of old-school 202 six, the incredible attention to detail, and the innovative interior – all of which set tongues wagging at MotorEx 2017.
Mixing wildly different styles often results in an awkward-looking street machine.
Not Ben’s EH – it pulls it off with cheerful nonchalance.
One reason the wagon combines such varied styles is that the build took 12 years.
It also has a lot of history with the Judd family. From 1978 it served as the family truckster, ferrying the Judd boys – Ben, Nik and Simon – to and from school. Then in 1993, Ben’s mum rewarded him for getting his licence by gifting him the iconic Holden wagon.
As his first car, Ben built it up as a neat streeter, hotting up the factory 179 with triple sidedraught Webers and other goodies. Unfortunately, Ben was forced to park it up in 2005, as the flourishing rust needed major attention.
To kick off the rust eradication program, the bare shell was sent to Friend’s Auto Restorations & Sandblasting for a play date with a blasting gun. Shedding the paint confirmed what the Judd brothers had already expected and from then on they were committed to a full ground-up rebuild.
The build turned into a three-way project between the brothers. Being a mechanic, Ben handled that side of things. Nik is a gun panel guy, while as the main man behind Elite Custom Interiors, Simon’s work should be well known to Street Machine readers.
Like most street machiners, the Judds have a bit of a rubber fetish. To satisfy this perversion, Miller Chassis grafted a set of fairly large tubs under the wagon’s rear.
“We love big rubber; all our cars are tubbed,” Ben says. “Simon’s Capri is in the process of getting tubbed, an HK Monaro we’re also working on is tubbed, the wagon is tubbed – you can’t beat the look of a tubbed car!”
A tunnel section was also cut into the floor to accommodate a burly three-inch exhaust.
Why does a 202 Holden six need a threeinch exhaust? Because it’s a stove-hot, 325hp 202, that’s why!
“It’s basically a sports sedan engine,” Ben says. “Back when the car was my everyday streeter, the original 179 dropped a valve and blew up the bottom end. A mate of Dad’s had lots of Holden six stuff and had a good bottom end he was willing to part with. When picking it up, we got to chatting and he told me: ‘If you want it to really go, you need to get one of these heads.’”
The head in question was a super-rare, one-of-25 Phil Irving 12-port. Ben took his advice, purchasing the head as well as the good bottom end. While bolting it together, Ben added a trio of Webers to create a 179-cube howler that served him well for a number of years.
Fast-forward to the new rebuild, and Ben wanted more oomph, while still retaining the EH’s red motor origins. Given there’s no replacement for displacement, the 179 made way for a meticulously prepared 202.
Other upgrades included detailed porting of the Irving head, copper head gasket, O-ringed block, forged slugs, 12:1 comp, H-beam rods, solid-roller cam, electronic ignition and a cavernous set of 50mm Webers. If you’re thinking 50mm is damn big, blame well-known racer Brad Tilley.
He told Brad: “If it was a race car, you’d
use 55s, but to get better driveability, go with the 50s!”
When they pulled the string on the dyno, Tilley’s input and Ben’s engine building skills were rewarded with 325hp – a mightily impressive figure for a streetable Holden 202.
Rounding out the drivetrain is a Protrans Trimatic and a very narrow VL turbo diff. To get that oh-so-perfect stance, there’s threeinch- lowered King springs up front, while the relocated rear leaf springs have been flattened around five inches. In addition to upgrading to ball-joint HR front end, steering duties are now handled by a Commodore rack, and instead of being front-mounted as normal, the narrowed rack is mounted behind the HR crossmember.
Hauling the wagon to a stop are brawny HSV/Harrop four-piston calipers clamping chunky 343mm and 315mm rotors.
“They were actually a necessity,” Ben says. “Initially I had VL turbo brakes on the rear, but after Craft Differentials shortened the diff to suit the deep-dish wheels, the calipers went inboard too far and hit the chassis rail. Then I noticed the HSV calipers stuck out way less – that fixed that. Rather than just do the rears, I bit the bullet and went big brakes all ’round. I’m glad I did, as they look so cool.”
Although there was plenty of room inside the cavernous 19- and 20-inch Intro billets for such a large brake package, that wasn’t always the case.
“I started off building the car to suit 15-inch Mickey Thompson bigs ’n’ littlies. But styles change and I decided to change things up and go the billets,” Ben says.
They’re such a standout feature, it’s hard to imagine PRO EH looking right with any other wheel.
Having spent countless hours on rust repairs and fabrication, Nik Judd (with plenty of help from Ty Yusuf and Ben) set about adding new door and tailgate skins, then finessing those classic EH bodylines into shape. They’re so sweet ’n’ sexy, they’re enough to make that other ‘Body’ (aka Elle McPherson) jealous. From there, the wagon was rolled into the booth at Exclusive Customs, who laid on the Mineral White over Electric Blue – the latter a 2003 Mini hue that perfectly suits the EH.
As trick as the paint, the wheels and the engine are, they’re never going to overshadow PRO EH’s jaw -dropping interior – take a bow, Simon.
“It was never part of the plan to go this far with the interior,” Ben says. “But it looked so good when it came back from Exclusive, there was no other choice.”
Building such a full-on custom interior in a freshly painted car caused a few headaches.
Getting the seats in was especially hairy.
“We taped everything up and managed not to scratch any paint,” Ben says.
“But it made life really hard because we couldn’t weld brackets or drill holes where we wanted.”
The concept was to retain as much of the EH feel as possible, but tweak it. In keeping with the brief, all the stitching in the white Hans Reinke Lamborghini Nappa leather is reminiscent of 1964. A host of original EH interior fittings were also retained.
However, there’s no getting past the fixedback wave-shaped bench seats. In the front, Simon welded, strengthened and reshaped the factory frame before using high-density foam to create the final shape. The rear he made from scratch.
As challenging as the seats were, the flat floors were even more so. The Porsche Pearl Grey carpeted floor inlays are one-piece that run front-to-back. They butt up to handformed, leather-covered panels made from
Colour: PPG Electric Blue/Mineral White
E N G I N E B A Y : Symmetry was the name of the game for the engine bay design, but the 1200hp blown and injected bigblock remains the star of the show Engine: 202 Holden Head: Phil Irving 12-port Intake: Phil Irving triple Webers Carbies: Weber 50mm Cam: Crane solid-roller, 612thou lift, 264/255 Lifters: Crane Pushrods: Crow Cams Springs: PAC with titanium retainers Crank: Stock Holden 202 Rods: Yella Terra H-beam Pistons: SRP Forged Rings/bearings: Moly/ACL Race Series Sump: Haddad Race Engines Ignition: VH electronic; MSD coil & leads Oil pump: JP Performance Radiator: Shaun’s Custom Alloy, thermo fan Headers: Custom extractors Exhaust: 3in with HiTech Muffler Preferred fuel: 98 PULP Power: 325hp@6200rpm at the crank
Gearbox: Trimatic, manual shift Converter: Dominator 4500rpm stall Diff: VL Turbo, 28-spline, 3.89:1
Front suspension: HR front end, King 3in-lowered springs, Koni adjustable shocks Rear suspension: 5in reset leaf springs, Koni adjustable shocks Steering: Rear-mounted Commodore rack Brakes: HSV/Harrop; four-piston calipers and 343mm rotors (f), four-piston calipers and 315mm rotors (r) Master cylinder: Wilwood; Wilwood pedal box
Trim: Lamborghini Nappa leather Seats: Custom bench Carpet: Porsche, Pearl Grey Wheel: EH with FC horn button Seatbelts: Retractable lap belts Shifter: B&M Hard Core Bandit Gauges: Auto Meter Prestige Antique Ivory Tunes: Hidden Bluetooth system operated via phone app Speakers/amp: Vibe 5.25in/Vibe 2-channel Soundproofing: Dynamat
Rims: Intro Saltster; 19x7 (f), 20x12 (r) Rubber: Nitto; 225/35R19 (f), 345/25R20 (r) Build time: 12 years
Ty Yusuf; Leigh Chandler; Alex ‘Big Al’ McLennan; Adam Fairbairn; Steve Friend; Chris Palazzo; Scott McGuire; Miller Chassis; Protrans; Exclusive Customs. Special thanks to my wife Melanie and daughter Olivia, and to my brothers Nik and Simon – I cannot thank you guys enough 038
hoop pine that have been resined, sanded and bogged. Same for all the rear panels, which give the wagon a super-sanitary and classy look.
Looking up, you’ll see a one-piece hoodlining. This massive project took Simon, Nik, Ben, Ty, Adam, Steve and Big Al over 200 hours to complete and required the roof skin off a donor EH wagon to use as a mould.
“It goes in through the back,” says Ben.
“Only just, as it’s a perfect fit.”
The custom door trims incorporate multiple insert panels along with the same polished billet strips used on the floor and cargo area.
This whole story could be dedicated just to the interior. Look closely at the accompanying photos to appreciate how impressive it is. No EH interior has ever looked like this.
“Over the 12-year build we missed multiple Summernats and MotorEx deadlines,” Ben says. “I decided early in 2017 that we were going to MotorEx this year – no ifs, no buts.
It was a massive effort by everyone, a mad scramble that nearly killed us, but we got there.
Silver for Impact & Display, plus Cherry’s Pick (see breakout) made it all worthwhile.
“I haven’t really driven it yet,” Ben continues.
“I’ve pretty much only driven it around the block. But on that short drive it surprised me; it seemed to go pretty good. And that’s comparing it to my LS-powered VL and Simon’s 10-second Capri.”
One thing you can be sure of: Whenever it ventures out, PRO EH will turn every head in sight – it just has that presence about it. s
CHERIELYNN Westrich of Overhaulin’ fame and Quick Time Bellhousings’ founder Ross McCombs were Mal Wood’s guests at MotorEx 2017, and both had high praise for the quality of our cars. Cherielynn was also invited to present the Cherry Picked Award to her favourite car of the show. Ben and the boys couldn’t believe it when PRO EH was announced as the winner.
“Having been to SEMA, GNRS and Motorama, MotorEx is now one of my top fi ve shows,” Cherielynn said. “For Cherry Picked, I wanted a car that defi nitely represents Australia’s style of car building; a ride that could hold the attention of and be appreciated by a worldwide audience. I look for attention-to-detail, style and hands-on builders – like the Judds! The paint was spectacular and the details were there, but that interior is what really sealed the deal.”