REECE LOUGHER

16, BEDFORDALE, WA

STORY BORS VISKOVIC

WHEN youíve been going to car shows for as long as you can remember and your dad is a topclass fabricator and welder, itís you end up having a pretty cool ride for your first car. Reece Lougher hasnít even got his licence yet, but with help from his dad Gareth and a few good friends, heís racking up the miles Ė and supervised hours Ė behind the wheel of this HZ Sandman ute.

Where did you find the ute?

We found it on Gumtree. It popped up pretty cheap, so we went down and had a look at it Ė we thought it would be cool to have a ute as well because we were already building a Sandman panel van. It had been sitting in the shed for 20 years or so and had low kays. It was originally just going to be a bit of a tidy-up, but then Dad got a little bit attached to it and started going a little bit more into it.

It won a trophy at the WA Hot Rod & Street Machine Spectacular, so it must be pretty tidy? We ended up taking the body off and repainting all the chassis; Mark Cook repainted it in the original Atlantis Blue and Phil Wall redid all the trim. It was all done in-house at my dadís business, Elite Wheel Services (see Tech Torque, p114).

Whatís the running gear in it?

Itís got a 253 in it and a Supra five-speed that came with it when we bought it; we just tidied up the conversion a bit and made the crossmember a bit neater. Itís the original motor but itís been completely rebuilt by another good friend, Lennard Vidot. The block and heads are original, but all the bolt-on parts have been replaced and we put an Edelbrock manifold and 600 vac-sec Holley on it.

Was it a long project?

No, the whole thing was done in six months. Tell us a bit more about the panel van. Weíre not doing anything that will bastardise the originality of the body. The plan is to do it up to show standard, then after a couple of years weíll take it back to original. Weíll do a chassis to elite-level and once we finish showing it, it will go back onto the original chassis.

WE THOUGHT IT WOULD BE COOL TO HAVE A UTE BECAUSE WE WERE ALREADY BUILDING A SANDMAN PANEL VAN

Your dad is one of the best fabricators around; are you following in his footsteps?

No, Iím doing an automotive electricianís apprenticeship. I wanted to be a house electrician at first but I wanted to be around cars at the same time. I asked Dad about being a fabricator and welder, but he said: ďDo something I donít know how to do; I can teach you that stuff later.Ē He put me on to Sav Morabito from Savís Auto Electrics and I did work experience one day a week for all of last year.

Aged around 21 or younger and have a neat ride? Send some pics and info to: Young Guns, Street Machine, Locked Bag 12, Oakleigh, Vic 3166 or email us at: younggun@bauer-media.com.au.

1: The panel van in the background is another Sandman. It will end up wearing the original Flamenco Red paint but with elite-level detailing in the body and chassis

2: The uteí original engine has had a freshen-up and been fitted with an Edelbrock intake, 600 vac-sec Holley and a set of extractors

3: The interior was restored by Phil Wall to a factory-fresh look

The 15x7 GTS rims were on the car when Reece got it, but they were given a spruce-up and paint detail at his dadí business, Elite Wheel Services

While you were still at high school?

I came to work every Monday and went to school the other days of the week. was in Year 10 at the time, but we talked to the principal and he allowed us to do it as long as I stayed on top of my work.

And you managed to still pass?

Yeah, passed everything, which was good. Now I do four days of work and one day of TAFE.